Q-SYS Designer programming, Core processor deployment, and end-to-end networked AV across Atlanta corporate, education, hospitality, and performance venues.
Q-SYS by QSC is a software-based audio, video, and control platform that runs on a real-time Linux operating system and moves all signals over standard IT networks instead of point-to-point analog or proprietary buses. At the heart of every system is a Q-SYS Core processor that handles DSP, AEC, routing, and control logic, while peripherals like the NV-32-H Network Video endpoint, NL Series network amplifiers, NC Series PTZ cameras, and NIO/PIO/IO bridges extend audio, video, and GPIO across the LAN. JB Technologies is an Atlanta-based Q-SYS integrator that designs, programs in Q-SYS Designer, commissions, and supports Q-SYS deployments throughout Georgia. We build native Microsoft Teams Rooms and Zoom Rooms experiences on Q-SYS, deploy multi-zone audio across hospitality and corporate campuses, integrate Q-SYS Reflect Enterprise Manager for proactive monitoring, and tune AEC, GPS-locked PTP networks, and QoS-aware switches for reliable performance from day one.
Software-based DSP, AEC, video routing, and control engines that anchor every Q-SYS system, scaling from huddle rooms with Core Nano to enterprise campuses on Core 610 and Core 3100.
Native Q-SYS network video encode/decode endpoints that distribute 4K HDMI sources over 1 Gbps networks with HDCP 2.2, video-tile mixing, and tight integration with Core processors and Q-SYS Designer.
Networked Class-D amplifiers with native Q-SYS connectivity, FAST tuning, GPIO, and high-efficiency power for distributed audio, paging, and performance reinforcement.
Q-SYS native NC-110, NC-12x80, and NC-20x60 cameras with auto framing, native control via Q-SYS Designer, and PoE+ deployment for Teams Rooms, Zoom Rooms, and lecture capture.
QSC-tuned PoE+ switches preconfigured with QoS, IGMP snooping, multicast, and PTP to support Q-SYS audio, video, and control traffic on a converged AV-over-IP backbone.
Networked I/O nodes that extend mic/line audio, GPIO control, and USB bridging from soft-codec PCs to remote rooms over standard Ethernet.
Cloud-based monitoring, alerting, and remote management platform that gives Atlanta IT and facilities teams real-time visibility into every Core, peripheral, and room across the enterprise.
Rooms / Zoom Rooms across Atlanta office towers and BTS tenant fit-outs
active-learning spaces in Georgia higher-ed and K-12 campuses
worship needing low-latency, high-channel-count networked audio and video
requiring evidence-grade audio capture and reliable broadcast feeds
with multi-zone background music, paging, and digital signage audio
Q-SYS handles paging, mass notification, and FIDS audio routing
Our team writes and version-controls Q-SYS Designer files in-house — DSP, control scripts, UCI touch panels, and Lua plugins — so you never wait on an out-of-state programmer for a room change.
Local commissioning, AEC tuning, and PTP/QoS network validation by Atlanta-based engineers who can be on-site at your Buckhead, Midtown, or Perimeter facility same-week.
We co-design the Q-SYS LAN with your IT team — VLAN segmentation, IGMP, PTP boundary clocks, and QoS markings — so AV traffic coexists cleanly on the corporate backbone.
Every Q-SYS deployment ships with Reflect Enterprise Manager configured for proactive alerting, firmware management, and remote diagnostics under a JBT service agreement.
We walk every space, capture room counts, codec preferences (Teams, Zoom, Webex), audio coverage goals, and integrate with the AV-over-IP and control standards your IT and facilities teams already run.
We size Cores, NV endpoints, NL amplifiers, and NIO peripherals, draft Q-SYS Designer schematics, produce signal flow and network diagrams, and coordinate VLANs, PTP, and QoS with IT.
Racks are pre-built and burned-in at our Atlanta shop, then deployed on-site with full DSP tuning, AEC calibration, UCI testing, and acceptance against a documented checklist.
We enroll every Core in Reflect Enterprise Manager, hand over as-builts and Designer files, and provide ongoing monitoring, firmware, and on-call support across your portfolio.
Traditional DSPs use proprietary cards and fixed I/O; Q-SYS runs on a software-based, real-time Linux OS where audio, video, and control all flow over standard Ethernet. That means you can scale by adding network peripherals (NIO, NV-32-H, NL amplifiers) without swapping the Core, and you get built-in AV-over-IP, native UCI touch panels, and Lua scripting in one platform.
Reflect is QSC's cloud monitoring platform. It gives you real-time health, room utilization, peripheral status, and alerting across every Q-SYS Core in your portfolio. For multi-room corporate, university, or hospitality deployments we strongly recommend it — it cuts mean-time-to-resolution and lets JBT diagnose issues remotely before users open a ticket.
We program Q-SYS Designer in-house. Our engineers hold QSC Level 1 and Level 2 certifications and we maintain a versioned library of UCI templates, Teams Rooms, Zoom Rooms, divisible-room logic, and Lua control plugins. Source files are handed over to you at project close — no vendor lock-in.
A proper Q-SYS LAN needs PTPv2 (IEEE 1588) for clock sync, DSCP-based QoS to prioritize audio/video over data, IGMP snooping with a querier for multicast video, and ideally dedicated VLANs. We co-design and validate this with your IT team, and the QSC NS Series switches ship preconfigured if you prefer a turnkey AV-VLAN.
Yes. Q-SYS is a Microsoft Teams Rooms certified platform and a Zoom Rooms certified appliance partner. We deploy Core 8 Flex / Core Nano with NC Series PTZ cameras and NV-32-H endpoints to deliver native MTR and Zoom Rooms experiences with single-cable connectivity, AEC, and consistent UCI control across every room.
For mission-critical rooms (council chambers, broadcast, large performance venues) we deploy redundant Cores with automatic failover, redundant network paths, and dual power. For multi-site corporate or campus rollouts, we standardize Designer templates, manage all Cores through Reflect, and stage equipment at our Atlanta shop so each site gets an identical, pre-validated rack.
Tell us about your facility and we will scope the right design, sizing, and integration plan.
Get a Quote
