Authorized Verkada access control installer for Georgia
JB Technologies designs, installs and commissions Verkada access control across commercial buildings in Georgia. Our scope of work covers the AC11 single-door controller, the AC41 four-door controller, the AC42 wireless-lock controller, door hardware integration, reader selection, mobile credential rollout through Verkada Pass and full Verkada Command commissioning. We are an authorized Verkada integrator and we operate as the customer's single point of accountability from design through warranty support. Most of our access control customers are property managers, corporate IT or operations leads at multi-site organizations who want one cloud platform instead of a per-site headend.
Verkada access control hardware and where each panel fits
AC11 single-door controller
The AC11 controls a single door and is the right choice for tenant suites, server rooms, lab and clean rooms, pharmacy doors, liquor rooms, IT closets and retail back-of-house entries. We use AC11 panels when the door count at a location is low and the install needs to be clean and code-compliant without overprovisioning the head-end.
AC41 four-door controller
The AC41 controls four doors from one panel and is the workhorse for office buildings, mid-rise floors, distribution-center office areas and school administrative wings. On large jobs we plan AC41 panels at logical zone boundaries so the customer can extend door count over time without re-pulling head-end cabling.
AC42 wireless lock controller
The AC42 supports wireless locks for doors that are expensive or impractical to wire conventionally. It opens up retrofit projects where existing buildings have door openings without door cores, where running conduit would damage architectural finishes, or where tenant fit-outs need door additions on a short schedule.
Readers, credentials and Verkada Pass
JB Technologies installs Verkada-listed readers at every controlled opening and supports physical card credentials, mobile credentials and Verkada Pass for app-based unlock. Mobile credentials are the right default for new construction and most retrofits because they cut the ongoing administrative cost of card issuance and revocation, especially in environments with high staff turnover.
Common Verkada access control deployment patterns
JB Technologies designs Verkada access control around the building's actual use, not a generic template. For multi-tenant office buildings, the typical pattern places AC41 panels in each floor's IDF closet, readers on every tenant suite door and stairwell-to-tenant-floor doors, and Verkada Pass mobile credentials issued through the property management workflow. For schools, the pattern is AC41 panels in admin and IDF rooms, readers on every exterior door, the main office entry and selected interior doors, with scheduled unlock and emergency lockdown configured in Command. For distribution centers, AC11 or AC41 panels live in the office area with readers at the office-to-warehouse door, the visitor entry and the secure server room. For retail and hospitality, AC11 panels cover BOH and stockroom doors with mobile credentials for staff.
Compliance, life-safety and emergency egress
Access control intersects life-safety code at every controlled opening. JB Technologies designs and installs Verkada access control to satisfy NFPA 101 free egress requirements, the Georgia State Minimum Standard Codes for buildings and the AHJ's local interpretation. Request-to-exit devices, door position switches and fail-safe versus fail-secure lock selection are decided up front and documented in the close-out. Doors that need to release on fire alarm are tied to the fire alarm contractor's relay so the integration is built once and inspected once. This is the kind of detail that matters when the AHJ walks the building and where shortcuts cost real money.
Door hardware integration
Access control only works when the door hardware behind it is right. Our project teams specify and install electric strikes, electromagnetic locks, request-to-exit devices, door position switches and door operators that match the door type, fire-rating, ADA requirements and AHJ expectations for the building. We also coordinate with the fire alarm contractor when an opening needs to release on alarm, and we document the integration in the close-out package so future inspections go smoothly.
Verkada Command and admin handoff
The Verkada access control deployment ends in Verkada Command. JB Technologies sets up the customer's organization, sites, zones, schedules, role-based admin, credential profiles and Pass enrollment workflow before handoff. We also run a 30-minute Command walkthrough so the customer's security or IT lead can issue credentials, manage schedules and lock or unlock doors from a phone without depending on the integrator for routine work.
Where JB Technologies installs Verkada access control in Georgia
We deploy Verkada access control across Atlanta, Sandy Springs, Roswell, Alpharetta, Marietta, Smyrna, Dunwoody, Decatur, Augusta and Savannah, plus the broader Georgia market for multi-site customers. We pull City and County low-voltage permits, coordinate AHJ inspections, and deliver a documented close-out package.
To plan a Verkada access control project for your Georgia site, call (770) 637-2094 or contact JB Technologies through the form on this page.
Frequently asked questions
Which Verkada access control panel does JBT specify for a typical office?
For a standard tenant suite under 16 doors, the Verkada AC41 four-door panel is the workhorse. For larger floor plates and multi-tenant office floors, the AC62 sixteen-door panel reduces enclosure count and home-run cabling. The AC11 is a single-door controller used for retrofits and isolated openings — back-of-house doors and shared restrooms in coworking, for example — where running a four-door panel for one door is overkill. All three panels register against the same Verkada Command tenant and administer under one dashboard.
What does a typical JBT Verkada access install scope include?
A full scope covers: door schedule and bill of materials, low-voltage cabling (door-to-panel home-runs), panel and reader mounting, electrified hardware termination (strikes, mag locks, exit devices, REX sensors, door position switches), Verkada Command tenant or site setup, Verkada Pass mobile credential configuration, role-based admin assignment for the customer's security and IT leads, schedule and access-level configuration, end-to-end door validation, and administrator training. JBT does not subcontract cabling — our technicians run, terminate, and commission on one crew.
What Verkada access control hardware does JBT stock locally?
JBT stocks AC41 four-door panels, the most-deployed reader SKUs (AD33 and AD34 smart readers), and the high-volume electrified hardware — Securitron mag locks, HES strikes, request-to-exit PIRs, door position switches — at our Kennesaw, GA office. AC62 sixteen-door panels, the AC11 single-door controller, and less-common reader models are typically 5–10 business days from Verkada distribution.
How does the AHJ get involved on a Verkada access control project?
The fire marshal review applies anywhere access control hardware touches an egress door. Specifically: mag locks on egress doors require an approved release strategy (fire alarm relay, manual pull station integration, motion-based REX with override), delayed egress timing must meet local code, and stairwell re-entry overrides need explicit approval. JBT coordinates the fire alarm tie-in with the fire alarm contractor and pulls the integration permit. Interior, non-egress door access control (server rooms, IT closets, executive offices) is generally just low-voltage permit work that JBT files on the customer's behalf.
What is the lead time on a Verkada access control deployment?
For an in-stock SKU mix on a 4–16 door tenant build-out, JBT can typically schedule rough-in within 1–2 weeks of an accepted proposal and complete commissioning 1–2 weeks after that — call it 2–4 weeks door-to-door when the construction site is ready. New-construction multi-floor builds with elevator destination integration run 6–12 weeks and are phased around the GC's punch list and the AHJ inspection windows.
What does post-install Verkada access service look like?
Verkada access control panels and readers carry a 10-year manufacturer warranty — JBT handles RMAs and on-site swaps under warranty. Beyond hardware, JBT's standard support agreement covers administrator help-desk for Verkada Command, scheduled firmware updates against Verkada's release train, credential issuance support during onboarding seasons (especially for K-12 and higher-ed customers), quarterly access-policy reviews, and moves/adds/changes for door reconfigurations. Most JBT Verkada clients renew annually; non-contract work is T&M with a 4-hour on-site minimum.
Request a Verkada Quote
Send a quick note with your building type and we'll respond within one business day with a Verkada system scope and budget range.